A power interruption can stop recording, disconnect remote viewing, and leave security cameras offline at the moment they are needed most. The right backup device helps keep an NVR, camera, router, or PoE network running through short outages and voltage interruptions.
This roundup includes dedicated PoE and NVR power solutions alongside compact DC mini UPS units and replacement adapters. Pay close attention to voltage, connector size, wattage, PoE requirements, and compatibility with your specific recorder before buying.
Best 10 Camera Backup Power Supplies for NVR Systems Picks for 2026
Best High-Capacity Option
- Eight PoE ports plus eight optional 12V outputs
- 52V and 12V dual-output design
- Protection features and status LEDs for 24/7 surveillance
Best For: Multi-camera CCTV, PoE, and access-control installations
Best Replacement Adapter
- 48V, 2A output with an 8.3-foot cable
- Fits select Lorex and other listed NVR models
- Protection against overcurrent, heat, load, and short circuits
Best For: Replacing a failed adapter on a verified compatible NVR
Best Compact Network Backup
- 20,000mAh/64Wh lithium battery with 0ms transfer
- 24V passive PoE plus DC and USB outputs
- Compact design with an 18W maximum output
Best For: Low-power networking and CCTV equipment
Best Reolink-Specific Adapter
- 52V, 2.3A, 120W output for listed Reolink equipment
- Designed for RLN8-410 and RLA-PS1 only
- Includes a two-year quality warranty and 30-day guarantee
Best For: Verified Reolink NVR or PoE switch adapter replacement
Compact Battery Backup
- 5400mAh rechargeable battery
- 12V 2A DC output
- Automatic outage switchover
Best For: A single compatible 12V camera or network device
Multi-Device Power Adapter
- Four-way DC power splitter
- 12V 2A, 24W output
- Six-foot power cord
Best For: Powering multiple compatible CCTV devices from one outlet
Entry-Level Emergency Backup
Garosa 2600mAh UPS for Cameras
- 2600mAh emergency battery
- Supports devices up to 2A
- Automatic backup activation
Best For: A single low-power compatible camera or router
Reliable 12V Replacement
- Regulated 12V DC, 2A output
- 5.5mm x 2.1mm center-positive plug
- UL, FCC, and RoHS listed
Best For: Compatible IP cameras, DVRs, NVRs, and routers
Compact USB Backup
- 2600mAh battery capacity
- 5V USB output rated up to 2A
- Automatic battery activation during outages
Best For: Compatible USB security cameras, routers, and modems
Protected Emergency Backup
2600mAh UPS Adapter for Cameras
- 2600mAh emergency battery capacity
- Automatic switchover during outages
- Overcharge, overcurrent, and overvoltage protection
Best For: Compatible cameras, routers, DVRs, and speakers
Best High-Capacity Option – EVERSECU 360W PoE UPS
For larger surveillance installations, the EVERSECU 360W unit is a purpose-built choice among camera backup power supplies for NVR systems. It combines eight PoE ports, eight optional 12V DC outputs, and support for a backup battery, making it suitable for mixed CCTV and IP-camera setups.
Best For: Multi-camera CCTV, PoE camera, and access-control systems that need centralized backup power.
Pros:
- Dual 12V and 52V outputs support varied surveillance equipment.
- Eight PoE ports support IEEE 802.3af/at, with stated transmission distances up to 250 meters.
- Includes multiple protections, low-ripple output, status LEDs, and a -10°C to 50°C operating range.
Cons:
- The 10.6-pound chassis is less convenient than a compact adapter.
- The optional 12V sub-board may be needed for the eight independent 12V ports.
- A backup battery is supported but is not included in the supplied specifications.
This is the most installation-oriented option in the group. Its port count and protection features suit a dedicated surveillance power cabinet, while the battery-ready design leaves runtime dependent on the battery selected separately.
Best Replacement Adapter – 48V NVR Charger for Lorex
This 48V, 2A adapter is a replacement-style choice for compatible NVRs rather than a battery backup. It can fit certain Lorex 4K eight-channel PoE NVRs and several listed Reolink, Amcrest, and Qcam models, but model verification is essential before buying.
Best For: Replacing a failed power adapter on a specifically compatible NVR or PoE recorder.
Pros:
- Wide 100–240V input range and an 8.3-foot cable support flexible placement.
- Listed compatibility includes select Lorex, Reolink, Amcrest, and Qcam equipment.
- Built-in overcurrent, temperature, load, and short-circuit protection.
Cons:
- It is a corded replacement adapter, not an outage-capable UPS.
- Compatibility is limited; the notes explicitly exclude several brands and models.
- The 48V/2A output may not suit NVRs requiring different electrical specifications.
Choose this only when the recorder’s voltage, current, connector, and model match the listing. It is a practical repair part for a supported NVR, but it will not keep cameras recording during a power failure without a separate backup system.
Best Compact Network Backup – KP5 MAX Mini UPS
The KP5 MAX is a compact battery-backed option for smaller network and CCTV setups. Its 20,000mAh, 64Wh lithium battery, 0ms transfer, 24V passive PoE, and several DC and USB outputs make it one of the more flexible camera backup power supplies for NVR systems when the connected equipment stays within its 18W output rating.
Best For: A router, modem, ONU, access point, or low-power camera setup needing compact uninterrupted backup.
Pros:
- 0ms transfer is designed to switch to battery power without interruption.
- Offers 24V passive PoE, 12V/9V/5V DC, USB-A, and USB-C outputs.
- Wall-mountable design, safety protections, and a built-in fan support organized operation.
Cons:
- The stated 18W maximum output limits use with higher-draw NVRs or multiple devices.
- It is not presented as a high-capacity replacement for a dedicated NVR UPS.
- Runtime varies with the connected load and is not specified in the supplied notes.
This is best viewed as a small network UPS rather than a full surveillance-rack power system. Confirm the voltage, connector, PoE type, and total wattage of every device before relying on it for camera or NVR continuity.
Best Reolink-Specific Adapter – REOLINK 52V NVR Power Supply
The REOLINK 52V, 2.3A adapter is designed for a narrow compatibility target: the Reolink RLN8-410 NVR and RLA-PS1 PoE switch. It supplies steady corded power, but like other replacement adapters, it does not provide battery runtime during an outage.
Best For: Replacing the power adapter for a compatible Reolink eight-channel PoE NVR or PoE switch.
Pros:
- Provides 52V output at 2.3A and 120W for the listed Reolink devices.
- Simple wall-mounted, two-pin power connection with a North American plug.
- Includes a 30-day money-back guarantee and a two-year quality warranty according to the notes.
Cons:
- Compatibility is explicitly limited to RLN8-410 and RLA-PS1.
- It is not a UPS and cannot maintain power when the mains supply fails.
- The notes contain conflicting voltage guidance, so the device label and required specification should be checked carefully.
This adapter makes sense as a direct replacement when the exact Reolink model is confirmed. Because the listing emphasizes narrow compatibility and includes conflicting specification language, verify the original adapter’s output before connecting it.
Compact Battery Backup – Eujgoov Mini UPS 12V 2A
For shoppers comparing camera backup power supplies for NVR systems, the Eujgoov Mini UPS is a compact option for compatible 12V equipment. Its 5.5×2.1mm DC output, 5400mAh battery, and automatic backup activation can help keep a camera or related network device powered during an outage.
Best For: Users needing battery-backed power for a single compatible 12V camera, router, modem, or similar device.
Pros:
- Provides 12V, 2A output through a DC 5.5×2.1mm port.
- Uses a 5400mAh rechargeable battery for emergency power.
- Automatically switches to backup power during an outage.
- Compact flame-retardant PC housing and plug-and-play setup.
Cons:
- Designed for compatible 12V devices rather than a complete NVR system.
- Runtime varies with the connected device’s power draw.
- Offers one DC output port, so it is not intended to power several devices directly.
This is a practical choice when your camera or networking gear matches the 12V/2A output and 5.5×2.1mm connector. Verify the device requirements before buying, especially if you need to power an NVR and multiple cameras together.
Multi-Device Power Adapter – ANLINK 12V 2A CCTV Splitter
Among camera backup power supplies for NVR systems, the ANLINK unit is a corded adapter rather than a battery UPS. It converts 100–240V AC to 12V DC and includes a four-way splitter, making it useful for distributing power to compatible CCTV cameras and related equipment from one outlet.
Best For: CCTV installations needing to power up to four compatible 12V devices from one wall adapter.
Pros:
- Supports 100–240V AC input and provides 12V DC, 2A output.
- Includes a four-way DC splitter for up to four compatible devices.
- Six-foot cord provides flexible placement.
- UL listed and identified with FCC, RoHS, EMC, and Level VI efficiency certifications.
Cons:
- Does not provide battery backup during a power outage.
- The total 2A output must be shared among connected devices.
- Requires confirming the 5.5×2.1mm connector and polarity before purchase.
This adapter can simplify power distribution for a small CCTV setup, but it cannot keep an NVR or camera operating when utility power fails. Pair it with a suitable UPS if outage protection is part of your installation plan.
Entry-Level Emergency Backup – Garosa 2600mAh UPS for Cameras
The Garosa UPS is a small emergency power supply for compatible routers, cameras, and other electronics. For camera backup power supplies for NVR systems, its 2600mAh battery and 2A support may suit a single low-power device, provided the connector and power requirements match.
Best For: Basic backup power for one compatible router, camera, or small 2A device.
Pros:
- Compact 2600mAh battery-powered design.
- Supports devices drawing up to 2A.
- Automatically activates during a power outage.
- Works with a range of listed devices, including CCTV cameras and modems.
Cons:
- Lower battery capacity than many larger mini UPS options.
- Runtime depends on the connected device’s usage.
- Supplied details identify the connector as USB, so compatibility should be checked carefully.
This model is best viewed as a compact, entry-level backup for a single compatible device rather than a solution for powering an entire NVR system. Confirm the required connector, voltage, and current before ordering.
Reliable 12V Replacement – 12V 2A Power Supply Adapter
For camera backup power supplies for NVR systems that need a dependable wall adapter, this 12V 2A model provides regulated DC output through a 5.5mm x 2.1mm center-positive plug. Confirm your equipment’s voltage, amperage, connector size, and polarity before ordering.
Best For: IP cameras, DVRs, NVRs, routers, and other compatible 12V DC devices that need a standard corded power source.
Pros:
- Regulated 12V DC, 2A output with 24W capacity.
- Wide AC 100–240V input range.
- UL, FCC, and RoHS listed with overcurrent, overvoltage, overload, short-circuit, and temperature protection.
- Includes a 1.2-meter cable and warranty/support coverage.
Cons:
- It is a standard AC adapter, not a battery-backed UPS.
- Only fits devices using the specified 5.5mm x 2.1mm center-positive connection and compatible 12V requirements.
This adapter is a practical replacement or spare for compatible NVR and camera installations, but it will not maintain power during an outage without a separate backup system.
Compact USB Backup – fosa 2600mAh Mini UPS
If you need camera backup power supplies for NVR systems or related low-power equipment, this compact USB mini UPS offers battery support for compatible 5V devices. Its 2A rating and USB connector make device specifications especially important to verify.
Best For: Compatible 5V USB security cameras, routers, modems, LED strips, and other devices drawing up to 2A.
Pros:
- 2600mAh battery capacity for backup power.
- Supports devices up to 2A with 5V DC USB output.
- Automatically switches to battery operation during power outages.
- Compact design with straightforward plug-in operation.
Cons:
- It is limited to 5V USB devices, so it may not directly power many 12V NVR systems.
- Runtime varies according to the connected device’s power consumption.
- The listed warranty is 90 days.
This is best viewed as a small backup option for USB-powered cameras or networking accessories rather than a universal NVR power solution. Check the required voltage and connector before purchase.
Protected Emergency Backup – 2600mAh UPS Adapter for Cameras
For camera backup power supplies for NVR systems and connected home equipment, this 2600mAh UPS adapter is designed to keep compatible devices running through brief power interruptions. Review your device’s voltage, connector, and expected runtime before choosing it.
Best For: Compatible cameras, routers, DVRs, speakers, LED strips, and similar equipment requiring this UPS adapter’s output.
Pros:
- 2600mAh battery provides emergency backup capacity.
- Designed to activate during a power cut without requiring a restart.
- Protective battery board and flame-retardant design.
- Protection against overcharge, overcurrent, and overvoltage.
Cons:
- Actual runtime depends on the connected device’s power consumption.
- Compatibility details such as output connector and exact output specifications should be confirmed before purchase.
- The listed warranty is 90 days.
This unit suits buyers seeking a compact emergency backup for compatible security and networking devices. Its automatic switchover and protection features are useful, but device matching remains essential.
How We Picked These Camera Backup Power Supplies for NVR Systems
We selected options across the most common security setups, including PoE NVRs, 12V DC cameras, routers, DVRs, and multi-device systems. Our comparison emphasizes electrical compatibility, output capacity, battery-backed operation, connection flexibility, and suitability for home or small-business surveillance.
Because backup runtime depends on the connected load and battery capacity, we avoid treating a larger capacity rating as an automatic guarantee of longer operation. A correctly matched, lower-capacity UPS can be more useful than an oversized unit with the wrong output or connector.
Quick Comparison
| System type | What to prioritize | Best-fit category |
|---|---|---|
| PoE NVR with several cameras | PoE ports, total wattage, and correct NVR voltage | Dedicated PoE UPS |
| Single 12V camera or DVR | 12V output, amperage, and plug polarity | 12V mini UPS or adapter |
| NVR plus router | Multiple outputs and sufficient watt-hours | Multi-device DC UPS |
| Replacing a failed power brick | Exact voltage, current, connector, and compatibility | Matching AC-to-DC adapter |
Key Buying Factors for Camera Backup Power Supplies for NVR Systems
Voltage, Amperage, and Connector Fit
Match the UPS output to the equipment label. Many cameras and DVRs use 12V DC, while PoE NVRs and switches may require 48V or 52V input. The power supply should meet or exceed the required current without exceeding the device’s supported voltage. Also verify barrel-plug dimensions, polarity, and included cables.
PoE Support and Total Load
A standard DC backup unit cannot necessarily power PoE cameras. If cameras receive power through Ethernet, choose a model with compatible PoE ports or back up the NVR, PoE switch, and network equipment separately. Add the wattage of every connected device and leave reasonable headroom for startup and peak loads.
Runtime and Transfer Behavior
Battery capacity, expressed in mAh or Wh, provides a rough indication of runtime, but actual results vary with load, battery age, and conversion efficiency. Zero-millisecond or seamless transfer is useful for equipment that may reboot during even a brief interruption. For longer outages, consider a larger UPS or a dedicated AC UPS with enough capacity for the whole system.
Compatibility and Installation
Check the manufacturer’s supported models carefully, especially for proprietary NVR power supplies. Confirm the number of outputs, cable length, ventilation, mounting location, and whether the unit can recharge while operating. Avoid using an adapter solely because the plug appears to fit.
Who Should Buy Which Camera Backup Power Supplies for NVR Systems?
Choose a dedicated PoE UPS if you run a multi-camera NVR with Ethernet-powered cameras and want centralized backup. A multi-output mini UPS is better for a modest setup involving a router, camera, or small NVR. For one 12V device, a compact DC UPS offers a simpler and more affordable solution. If your existing power brick has failed but you do not need battery backup, select an exact-match replacement adapter instead.








