GUNS N FREEDOMGEAR UP. GET OUT THERE. ⌕ Find a guide
Menu

10 Best Red Dot Shotgun Mounts of 2026 for Faster Target Acquisition

Adding a dot to a shotgun can make target acquisition faster and more consistent, especially for home defense, hunting, and range use.

These picks focus on fit, mounting style, optic compatibility, and overall value so you can choose a setup that matches your shotgun and your optic.

Table of Contents

Best 10 Red Dot Shotgun Mounts Picks for 2026

Mossberg rail mount with shell carrier

UTG Mossberg 590 Optic Mount with Shell Carrier

UTG Mossberg 590 Optic Mount with Shell Carrier
  • Fits 12 gauge Mossberg 590 and 500 shotguns
  • Includes removable 4-round shell carrier
  • Picatinny rail with bead sight access

Best For: Mossberg 590/500 owners wanting a mounted optic rail plus extra shell storage

Vent rib optic mount for shotguns

TRUGLO Universal Shotgun Rib Mount

TRUGLO Universal Shotgun Rib Mount
  • Fits ventilated ribs from 6mm to 10mm wide
  • Keeps optic with barrel to help maintain zero
  • Compatible with several red dot footprints

Best For: Shotguns with ventilated ribs that need an easy optic solution

Remington 870 optic rail mount

UTG 870 Optic Mount, 12 Gauge, Black

UTG 870 Optic Mount, 12 Gauge, Black
  • Fits Remington 870 and 870DM 12 gauge shotguns
  • Full-length Picatinny rail preserves bead sight access
  • Includes removable 4-round shell carrier

Best For: Remington 870 users wanting an optic rail with extra shell capacity

Direct-fit Mossberg dot mount

Monstrum Red Dot Mount for Mossberg Shotguns

Monstrum Red Dot Mount for Mossberg Shotguns
  • Direct mounts to factory holes on compatible Mossberg models
  • Multiple footprint patterns available
  • Includes several screw sets for fitment

Best For: Mossberg shotgun owners wanting a direct-fit red dot adapter

Low-Profile Dovetail Mount

UTG Super Slim RDM20

UTG Super Slim RDM20
  • 0.33-inch saddle height keeps the optic low.
  • Fits 9mm to 11mm flat or round dovetail rails.
  • Optional recoil stop pin adds retention.

Best For: Low-profile dovetail mounting on compatible rails.

Universal Rib Mount

ohhunt RMR/SRO Steel Plate

ohhunt RMR/SRO Steel Plate
  • Fits ventilated ribs 6mm to 10mm wide.
  • Supports RMR/SRO and several Holosun footprints.
  • Lightweight 23.5 g steel-and-alumina design.

Best For: Ventilated-rib shotguns needing a compact optic plate.

Enclosed Optic Bundle

Monstrum B.O.P. Enclosed Red Dot with Shotgun Mount

Monstrum B.O.P. Enclosed Red Dot with Shotgun Mount
  • Enclosed housing protects against dust and moisture
  • Shake Awake and up to 50,000-hour battery life
  • Fits many popular drilled-and-tapped shotguns

Best For: buyers who want an enclosed red dot and shotgun mount together

RMR Base Mount

Monstrum Grimlock Shotgun Red Dot Mount, RMR Footprint

Monstrum Grimlock Shotgun Red Dot Mount, RMR Footprint
  • Built for direct RMR-footprint optic mounting
  • Includes multiple screw sets and hole-pattern support
  • Fits many drilled-and-tapped shotgun models

Best For: owners of RMR red dots needing a shotgun receiver base

RMSc Base Mount

Monstrum Grimlock Shotgun Red Dot Mount, RMSc Footprint

Monstrum Grimlock Shotgun Red Dot Mount, RMSc Footprint
  • Dedicated RMSc-footprint shotgun mount
  • Includes screw sets for common drill patterns
  • Backed by a lifetime guarantee

Best For: users with an RMSc red dot and a drilled shotgun receiver

Mossberg rail mount with shell carrier – UTG Mossberg 590 Optic Mount with Shell Carrier

If you’re comparing red dot shotgun mounts for a Mossberg 590 or 500, this UTG option is built for a straightforward, no-permanent-modification install. It adds a full-length Picatinny rail while keeping bead sight access intact, and it also includes a removable 4-capacity shell carrier for extra onboard ammo.

Best For: Mossberg 590 and 500 owners who want a rail-mounted red dot setup with added shell storage.

Pros:

  • Designed for 12 gauge Mossberg 590 and 500 shotguns
  • Full-length scalloped Picatinny rail keeps bead sight access intact
  • Includes a removable 4-capacity shot shell carrier
  • No permanent modification required

Cons:

  • Not compatible with mag-fed 590M models
  • Limited to 3.5-inch and under chamber clearance

This is a practical fit for hunters or home-defense users who want a stable optic platform without altering the shotgun. The added shell carrier is a useful bonus, but compatibility is specific to the Mossberg 590 and 500 family.

Vent rib optic mount for shotguns – TRUGLO Universal Shotgun Rib Mount

For shooters looking at red dot shotgun mounts without drilling a receiver, this TRUGLO rib mount is a simple way to add optics to a ventilated-rib shotgun. It clamps to ribs in the 0.236 to 0.395 inch range and keeps the optic on the barrel so zero can be maintained when changing barrels.

Best For: Shotguns with ventilated ribs that need a low-profile optic mount without machining.

Pros:

  • Fits ventilated ribs from 0.236 to 0.395 inches wide
  • Mounts optics to the barrel and helps maintain zero when changing barrels
  • Low-sitting design can support a more comfortable cheek weld
  • Includes mounting hardware and tools

Cons:

  • Only works with compatible ventilated-rib shotguns
  • Optic compatibility is limited to listed footprints and models

This mount is a good practical choice if your shotgun lacks a drilled-and-tapped receiver. It offers a clean optic solution, but you should verify both rib width and red dot footprint before buying.

Remington 870 optic rail mount – UTG 870 Optic Mount, 12 Gauge, Black

If you’re shopping red dot shotgun mounts for a Remington 870, this UTG mount gives you a full-length Picatinny platform with bead sight access left intact. It is made for 12 gauge 870 and 870DM mag-fed shotguns, and it installs without permanent modification.

Best For: Remington 870 owners who want a sturdy optic rail and onboard shell storage.

Pros:

  • Built for 12 gauge Remington 870 and 870DM mag-fed shotguns
  • Scalloped full-length Picatinny top rail
  • Bead sight access remains intact
  • Includes a removable 4-capacity shot shell carrier

Cons:

  • Only for 3.5-inch and under chamber clearance
  • Not intended for non-870 shotgun models

For 870 owners, this is a straightforward way to add an optic while keeping the factory bead usable. The shell carrier adds utility, though the fit is specifically tied to the Remington 870 platform.

Direct-fit Mossberg dot mount – Monstrum Red Dot Mount for Mossberg Shotguns

Among red dot shotgun mounts for Mossberg shotguns, this Monstrum adapter keeps things simple by mounting directly to the factory holes. It is made for Mossberg 500, 535, 590, 835, and Shockwave series models, and it comes with multiple screw sets to match different red dot mounting hole depths.

Best For: Mossberg owners who want a direct-mount red dot solution with footprint flexibility.

Pros:

  • Direct mounts to factory mounting holes
  • Compatible with Mossberg 500/535/590/835/Shockwave series
  • Available in multiple footprint patterns
  • Includes multiple screw sets for red dot compatibility

Cons:

  • Compatibility should be checked against the footprint chart
  • Only fits the Mossberg models listed by the manufacturer

This is a clean option if you want a low-hassle optics setup on a compatible Mossberg. The biggest benefit is direct mounting, but you should confirm your dot’s footprint before ordering.

Low-Profile Dovetail Mount – UTG Super Slim RDM20

If you’re shopping for red dot shotgun mounts and want to keep the optic as low as possible, the UTG Super Slim RDM20 is built around that goal. Its 0.33-inch saddle height helps minimize height over bore, and it fits 9mm to 11mm flat or round dovetail rails with support for UTG OP3 Micro Reflex Dot Sights and most Docter-footprint MRDS.

Best For: Shooters who need a low-profile dovetail mount for compatible rails and micro reflex optics.

Pros:

  • Low 0.33-inch saddle height helps keep the optic close to the bore.
  • 6061-T6 aluminum construction with matte black anodized finish.
  • Works with 9mm to 11mm flat or round dovetail rails.
  • Optional recoil stop pin adds extra retention against bidirectional recoil.

Cons:

  • Only fits compatible dovetail rails, not direct shotgun receiver mounts.
  • Best suited to UTG OP3 Micro and most Docter-footprint MRDS.
  • Compatibility should still be checked against your specific optic and rail.

This is a practical option if your priority is a slim, stable mounting solution rather than a universal shotgun adapter. The included tools and lifetime warranty add value, while the silicone insert helps preserve the OP3 Micro’s IPX7 waterproof rating.

Factory-Hole Shotgun Adapter – Monstrum Mossberg Red Dot Mount

For red dot shotgun mounts on Mossberg platforms, this Monstrum adapter is designed for direct installation on the factory mounting holes. It is made for Mossberg 500, 535, 590, 835, and Shockwave series shotguns, and it comes in multiple footprint patterns so you can match your optic more easily.

Best For: Mossberg owners who want a direct-mount red dot solution using the factory holes.

Pros:

  • Direct mounts to factory holes with no additional hardware required.
  • Compatible with Mossberg 500/535/590/835/Shockwave series models.
  • Includes multiple screw sets for better red dot footprint compatibility.
  • Lifetime guarantee from Monstrum.

Cons:

  • Only for the listed Mossberg shotguns.
  • You need to match the footprint and screw length to your optic.
  • Compatibility depends on the specific red dot and mounting holes.

This is a straightforward choice when you want a purpose-built shotgun mount instead of a universal setup. The biggest advantage is how directly it interfaces with the factory mounting points, making installation simpler for compatible Mossberg guns.

Universal Rib Mount – ohhunt RMR/SRO Steel Plate

If your shotgun uses a ventilated rib, this ohhunt mount offers a compact way to add a red dot without a bulky setup. It is designed for ribs between 0.236 and 0.395 inches wide and supports Trijicon RMR/SRO, Holosun 407C/507C/508T, and the ohhunt RD U2 footprint.

Best For: Rib-mounted optics on shotguns with compatible ventilated rib widths.

Pros:

  • Fits ventilated ribs from 6mm to 10mm wide.
  • Steel base with hard alumina outer construction for a lightweight mount.
  • Compatible with several popular RMR/SRO and Holosun footprints.
  • Compact 23.5 g design keeps added weight low.

Cons:

  • Limited to shotguns with a compatible ventilated rib.
  • Not a direct receiver mount.
  • Footprint compatibility still needs to be confirmed before buying.

As a rib-mount option, this model makes sense when you want a low-mass optic plate for an existing ventilated rib. The steel-and-alumina construction and broad footprint support make it versatile, but rib width is the key fitment check.

Enclosed Optic Bundle – Monstrum B.O.P. Enclosed Red Dot with Shotgun Mount

If you’re comparing red dot shotgun mounts for a drilled-and-tapped gun, the Monstrum B.O.P. setup is a compact all-in-one option. It pairs an enclosed red dot with a fixed universal shotgun mount, giving you a protected optic platform with broad compatibility across many common shotgun receivers.

Best For: Shooters who want an enclosed red dot and universal shotgun mount in one package for popular drilled-and-tapped shotguns.

Pros:

  • Enclosed red dot housing helps protect against dust and moisture.
  • Shake Awake motion sensing can auto-off after one hour and reactivate on movement.
  • Up to 50,000 hours of battery life on a single CR2032 battery.
  • Compatible with many popular shotgun models, including Mossberg, Remington, Winchester, and more.

Cons:

  • Requires a drilled-and-tapped shotgun platform.
  • Mount is fixed, so it is less flexible than standalone mounting systems.
  • Compatibility should still be checked against your specific model.

This is a practical choice if you want a protected optic with long battery life and a mount already matched to the shotgun use case. The tradeoff is that it is more of a bundled solution than a modular setup.

RMR Base Mount – Monstrum Grimlock Shotgun Red Dot Mount, RMR Footprint

For shoppers focused on red dot shotgun mounts rather than a complete optic, the Monstrum Grimlock is a dedicated receiver base built for RMR footprint dots. It is made for popular drilled-and-tapped shotguns and includes a universal mounting system plus the screw sizes needed to work across several common shotgun patterns.

Best For: Users who already own an RMR-footprint red dot and need a shotgun-specific base mount.

Pros:

  • Designed for direct mounting of an RMR-footprint red dot.
  • Includes #8-40 and #6-48 screw sets in multiple lengths.
  • Slots accommodate multiple drill hole patterns.
  • Compatible with many popular shotgun models, including Mossberg, Remington, Winchester, and more.

Cons:

  • Only works with RMR footprint optics.
  • Not compatible with other red dot models.
  • Requires a drilled-and-tapped shotgun receiver.

This mount makes sense if your optic choice is already set and you want a receiver base with broad shotgun compatibility. The included hardware and footprint-specific design simplify the install path, but only if your dot matches the mount standard.

RMSc Base Mount – Monstrum Grimlock Shotgun Red Dot Mount, RMSc Footprint

This version of the Monstrum Grimlock is the same shotgun-focused mounting platform, but sized for RMSc footprint optics. If you’re sorting through red dot shotgun mounts and your optic uses RMSc, this is the dedicated base to look at for a direct receiver install on compatible drilled-and-tapped shotguns.

Best For: Shooters with an RMSc-footprint red dot who need a shotgun-specific mounting base.

Pros:

  • Made for direct mounting of RMSc-footprint red dots.
  • Includes #8-40 and #6-48 screw sets in multiple lengths.
  • Supports multiple drill hole patterns for broader shotgun compatibility.
  • Backed by a lifetime guarantee from Monstrum.

Cons:

  • Only compatible with RMSc footprint optics.
  • Not compatible with other red dot models.
  • Requires a drilled-and-tapped shotgun receiver.

For RMSc users, this is a straightforward way to mount a compatible dot on a common shotgun platform. The main limitation is simple: the optic footprint must match, or this mount will not be the right fit.

How We Picked the Best Red Dot Shotgun Mounts

We focused on Red Dot Shotgun Mounts that offer solid compatibility, secure attachment, and practical value. The best options in this roundup are designed for common shotgun platforms, from rib-mounted universal solutions to model-specific mounts for popular Mossberg and Remington-pattern guns. We also considered whether the mount supports low-profile optic placement, repeatable zero, and straightforward installation.

Quick Comparison

In broad terms, universal rib mounts are the easiest starting point if you want flexibility across different shotguns. Model-specific mounts tend to provide a cleaner fit and better alignment. Drilled-and-tapped mounts usually offer the most secure, low-profile setup, while adapter-style designs can help match your existing optic footprint to the mount you already have.

Key Buying Factors for Red Dot Shotgun Mounts

Shotgun Fit and Mounting Style

Start by confirming whether your shotgun uses a ventilated rib, drilled-and-tapped receiver, or a platform-specific pattern. A mount that matches your gun’s actual hardware will save time and reduce wobble.

Optic Footprint Compatibility

Check the red dot footprint before buying. Some mounts are built for compact sights like the RMR pattern, while others accept a broader range of optics or use a universal plate system.

Height Over Bore

Lower mounting height generally improves cheek weld and keeps your aiming point more natural. If you plan to use the shotgun for defensive shooting or fast-moving targets, a low-profile option is often easier to run.

Material and Stability

Steel and quality aluminum mounts usually hold up better to recoil and hard use. A secure lockup matters more than extra features, especially on heavier-recoiling shotgun loads.

Who Should Buy Which Red Dot Shotgun Mounts?

If you want the simplest path, choose a universal rib mount. If you own a common platform like a Mossberg 500-series or a drilled-and-tapped receiver, a dedicated fit can deliver better alignment and a cleaner install. If your optic already has a specific footprint, prioritize a mount that matches it exactly rather than relying on adapters later.

For most buyers, the best Red Dot Shotgun Mounts are the ones that balance fit, optic compatibility, and durability without adding unnecessary height or complexity.