If you need to correct a bad load without wasting bullets, powder, or brass, the right puller can save time and money fast. Bench mounted bullet pullers are especially useful for reloaders who want more control and less mess than hand-impact tools.
Below, we focus on practical differences that matter at the bench: compatibility, ease of use, caliber range, and how cleanly each tool removes components for reuse.
Best 10 Bench Mounted Bullet Pullers Picks for 2026
Bench-Mounted Collet Puller
RCBS Collet Style Bullet Puller
- Threads into standard 7/814 single-stage presses
- Designed to pull jacketed bullets cleanly
- Collets sold separately by caliber
Best For: Single-stage press users who want controlled jacketed-bullet removal
Workbench Inertia Puller
Frankford Arsenal Pile Driver Projectile Puller
- Mounts to a workbench or wall
- Lever design uses inertia force for easier pulling
- Standard carrier handles up to .30-06 cartridges
Best For: Batch pulling at a dedicated reloading bench
Universal Press Puller
Forster Universal Bullet Puller
- Works with Co-Ax Press and 55 8-14 loading presses
- Covers bullets from 17 cal. to .458 cal.
- Solid steel collets sold separately
Best For: Co-Ax users who want a broad-caliber press puller
Cam-Lock Press Puller
MILMUMU Reload Device Cam Lock Puller
- Mounts to standard 7/8-14 presses
- Uses size-specific collets sold separately
- Not for use with cast bullets
Best For: Press users wanting a quick cam-lock bullet puller
Bench-Side Inertia Puller
Lyman Magnum Inertia Bullet Puller Multiple, 1 Pack
- Traps components with a few raps on the bench
- Fits calibers from 5.7 x 28FN to magnums
- Rubber-insert handle for a sure grip
Best For: Reloaders who want a simple inertia puller for broad caliber use
Press-Mounted Collet Puller
Forster Products Standard Bullet Puller
- Fits standard loading presses with 7/8"-14 thread
- Collet grip tightens as the bullet is removed
- Collets sold separately for 17 to 458 cal.
Best For: Standard press users who want a secure collet-style puller
Replacement Collet
Hornady 392154 Cam Lock Bullet Puller Collet
- Fits Hornady Cam Lock bullet puller systems
- Standard-size collet for Regular/358 caliber
- Steel collet made in the USA
Best For: Hornady Cam Lock owners needing a .358-caliber collet
Impact Puller Pick
- 3 included collets for wide caliber coverage
- One-whack impact design for quick separation
- Lightweight aluminum and heavy-duty plastic build
Best For: Reloaders wanting a simple, versatile impact puller
Storage-Friendly Impact Puller
- Covers most rifle and pistol cartridges .22 to .45
- Removes bullet and powder for reuse
- Handle stores two extra collets
Best For: Reloaders who want easy storage and broad cartridge coverage
Universal Caliber Pick
- Three collet sets for broad compatibility
- Fits rimmed and rimless cartridges .22 Hornet to 45-70
- Steel shaft with impact-resistant body
Best For: Reloaders needing a durable, wide-compatibility puller
Bench-Mounted Collet Puller – RCBS Collet Style Bullet Puller
If you want a bench mounted bullet puller that works cleanly on jacketed bullets, this RCBS collet-style tool is a straightforward press-mounted option. It threads into standard single-stage presses and gives you controlled bullet removal when loads need to be corrected or changed, but you’ll need caliber-specific collets to make it work.
Best For: Reloaders who already use a single-stage press and want a controlled, jacketed-bullet puller.
Pros:
- Press-mounted design threads into standard 7/814 single-stage presses
- Designed to pull jacketed bullets without damaging them
- Simple, controlled way to correct or change loads
- Made in the U.S. according to the product notes
Cons:
- Requires caliber-specific collets, which are sold separately
- Not a complete ready-to-use setup out of the box
This is a good fit if you want a bench-mounted style puller integrated into your press setup and you are comfortable buying the matching collets for each caliber you use. It is best suited to jacketed bullets and users who value clean, controlled extraction over speed.
Workbench Inertia Puller – Frankford Arsenal Pile Driver Projectile Puller
The Frankford Arsenal Pile Driver is a bench mounted bullet puller built around an inertia-style lever design, making it a practical choice for pulling projectiles with less damage than many traditional methods. It mounts to a workbench or wall and includes a standard carrier assembly, with a magnum carrier available separately if you need it.
Best For: Reloaders who want a mounted, high-leverage puller for batch work at the bench.
Pros:
- Lever design uses inertia force for easier pulling
- Mounts to a workbench or wall
- Standard carrier assembly holds up to .30-06 cartridges
- Includes a barbed fitting for routing components into a bucket
Cons:
- Magnum carrier assembly is sold separately
- Barb must be removed before using the small tray
If you need a mounted puller for larger jobs, this model emphasizes convenience and cleanup as much as extraction. Its safety feature and workbench-or-wall mounting make it especially practical for a dedicated reloading space.
Universal Press Puller – Forster Universal Bullet Puller
Forster’s universal bullet puller is a bench mounted bullet puller designed for use with the Co-Ax Press, while also working with standard loading presses that use a 55 8-14 thread. It tightens its grip as the bullet is removed, and the solid steel collets are sold separately by caliber.
Best For: Co-Ax press owners and reloaders who want a universal press-mounted puller for a wide caliber range.
Pros:
- Works with the Forster Co-Ax Press
- Also fits standard loading presses with a 55 8-14 thread
- Supports bullets from 17 cal. to .458 cal.
- Grip tightens as the bullet is removed
Cons:
- Solid steel collets are sold separately
- Best suited to presses that match the stated threading or Co-Ax setup
This is a flexible press-mounted option if you need one puller that covers many bullet sizes. Just plan on buying the correct collets, since the tool itself is only part of the setup.
Cam-Lock Press Puller – MILMUMU Reload Device Cam Lock Puller
This bench mounted bullet puller is built around a cam lock puller design that mounts to standard 7/8-14 presses. It uses size-specific collets sold separately and is described as a fast, easy way to pull bullets while helping you save brass and powder for future loading.
Best For: Reloaders who want a cam-lock style puller for press-mounted bench work.
Pros:
- Mounts to any press with standard 7/8-14 threads
- Cam lock handle assembly is designed for quick pulling
- Uses size-specific collets sold separately
- Made from aluminum according to the product notes
Cons:
- Collets are not included
- Not for use with cast bullets
- Assembly details in the listing are limited
If you already run a standard reloading press, this is a simple bench-friendly puller style with a quick cam-lock action. It makes the most sense for users focused on pressed-in bullet removal and who are prepared to buy the matching collets.
Bench-Side Inertia Puller – Lyman Magnum Inertia Bullet Puller Multiple, 1 Pack
If you want one of the simplest bench mounted bullet pullers in practice, this Lyman inertia model is built to strip loaded rounds with a few taps on the bench. It works by trapping components inside the puller, which makes it a straightforward option when you need to undo a mistake without damaging the bullet or case.
Best For: Reloaders who want a simple, bench-tap style puller that handles a wide range of calibers.
Pros:
- Safely strips loaded rounds in seconds without damage to bullet or case
- Fits a full range of calibers, from 5.7 x 28FN to large magnums
- Ergonomic molded handle with rubber insert for a sure grip
- Traps components with just a few raps on the bench
Cons:
- Requires repeated striking on the bench to operate
- Not a press-mounted style puller
For a no-fuss bench use solution, this puller focuses on speed, broad caliber coverage, and component recovery. It is a practical choice if you prefer a compact tool over a press-mounted setup.
Press-Mounted Collet Puller – Forster Products Standard Bullet Puller
Among bench mounted bullet pullers, this Forster model is designed to work with standard loading presses using a 7/8″-14 thread. It uses caliber-specific collets to disassemble rounds and salvage components when you need to correct a load, change your mind, or alter ammunition.
Best For: Reloader setups with standard presses that need a secure, collet-based bullet puller.
Pros:
- Made for standard loading presses with 7/8″-14 thread
- Collet system is designed to tighten its grip as the bullet is removed
- Helps reduce the chance of damage so more components can be salvaged
- Covers bullets from 17 cal. to 458 cal. with separately sold collets
Cons:
- Not intended for use with the Forster Co-Ax Press
- Collets are sold separately
This is a solid choice if you want a press-mounted tool that feels controlled and secure. Just plan on buying the correct caliber collet for the rounds you pull most often.
Replacement Collet – Hornady 392154 Cam Lock Bullet Puller Collet
If your bench mounted bullet puller uses Hornady’s Cam Lock system, this replacement collet is the caliber-specific piece that makes the tool work. It is a steel collet designed for the standard-size Cam Lock puller and sized for Regular/358 caliber use.
Best For: Reloaders who already own a Hornady Cam Lock puller and need a .358-caliber collet.
Pros:
- Works with Hornady Cam Lock bullet puller systems
- Standard-size collet made for Regular/358 caliber
- Steel construction
- Made in the USA
Cons:
- Only a single caliber-specific collet, not a complete puller
- Requires a compatible Hornady Cam Lock bullet puller
This is a useful replacement part rather than a full tool, so it makes sense mainly if you are already set up with the Hornady Cam Lock system. It is a straightforward way to keep that puller ready for .358-caliber work.
Impact Puller Pick – Frankford Arsenal Quick-N-EZ
If you want one of the most practical bench mounted bullet pullers for routine reloading cleanup, the Frankford Arsenal Quick-N-EZ Impact Bullet Puller keeps the process simple. It uses an impact-style design with three included collets, so it can handle a wide range of calibers from .22 Hornet to 45-70 without needing a separate tool for each job.
Best For: Reloaders who want a simple impact puller with broad caliber coverage and an easy one-whack process.
Pros:
- Includes 3 collets for broad compatibility across rimmed and rimless cartridges
- Works with a single firm strike to separate bullet from brass
- Lightweight aluminum and heavy-duty plastic construction
- Comes with 1 hammer, 3 collets, and 4 O-rings
Cons:
- Will not work with rimfire cartridges
- Impact design requires a sturdy surface and a controlled strike
For bench use, this is a straightforward tool that prioritizes versatility over complexity. If you mainly need a durable, no-fuss puller for common centerfire cartridges, it covers the basics well.
Storage-Friendly Impact Puller – Hornady Lock-N-Load Impact
The Hornady Lock-N-Load Impact Bullet Puller is a practical choice if you want bench mounted bullet pullers that are easy to grab and use for cartridge cleanup. It works on most rifle and pistol cartridges from .22 to .45 caliber, and its hollow head is designed to remove both the bullet and powder for reuse without damaging the components.
Best For: Reloaders who want a simple impact puller with built-in storage for extra collets.
Pros:
- Works with most rifle and pistol cartridges from .22 to .45 caliber
- Removes both bullet and powder for reuse
- Handle stores two extra collets
- Backed by a no-risk, lifetime warranty
Cons:
- Impact tool still needs a hard surface and repeated tapping
- Not designed for rimfire cartridges
This is a useful option if you value convenience features like onboard collet storage. It stays focused on the job at hand while covering a broad range of common cartridges.
Universal Caliber Pick – 3 Collet Impact Puller
For shoppers comparing bench mounted bullet pullers, this universal impact bullet puller stands out for its broad caliber range and simple one-strike operation. It comes with three collet sets and is designed for cartridges from .22 Hornet to 45-70, including both rimmed and rimless cases, making it a flexible bench tool for mixed-caliber work.
Best For: Reloaders and gunsmiths who need a versatile puller for a wide range of centerfire cartridges.
Pros:
- Three included collet sets for broad compatibility
- Works with rimmed and rimless cartridges from .22 Hornet to 45-70
- One firm strike removes bullets quickly
- Steel shaft, impact-resistant polycarbonate body, and rubber O-rings
Cons:
- Still uses an impact method, so a sturdy surface is required
- Not intended for rimfire cartridges
- Extra collet sets add setup steps compared with a single-size tool
If you want a puller that leans into versatility and durability, this one is well suited to a busy reloading bench. The included collets and rugged build make it a strong general-purpose option.
How We Picked These Bench Mounted Bullet Pullers
We focused on tools that support real reloading workflows: reliable bullet removal, broad caliber coverage, strong press or bench compatibility, and straightforward setup. We also weighed how well each option handles repeated use, since Bench Mounted Bullet Pullers are most valuable when they can speed up correction work without damaging components.
Quick Comparison
Collet-style models usually provide the cleanest bullet extraction for matched calibers, while inertia-style pullers are more universal and often simpler to start with. Press-mounted and cam-lock designs tend to offer better leverage and control, making them a better fit for reloaders who correct loads more often or process larger batches.
Key Buying Factors for Bench Mounted Bullet Pullers
Compatibility with Your Press
Check whether the puller works with your existing single-stage press, standard 7/8"-14 threading, or a specific cam-lock setup. A great puller is only useful if it mounts securely and aligns properly with your press.
Collet System Vs. Impact Style
Collet pullers are usually the best choice when you want consistency and minimal damage to bullets you plan to reuse. Impact pullers are more universal and can be a better backup tool, especially if you load a wide mix of calibers.
Caliber Range
If you load everything from small varmint rounds to larger hunting cartridges, prioritize models with multiple collets or universal carriers. For a narrow set of cartridges, a caliber-specific puller may deliver faster setup and better grip.
Speed and Ergonomics
Bench Mounted Bullet Pullers should reduce strain and improve efficiency. Look for easy handle action, solid leverage, and a design that keeps components stable during repeated pulls.
Who Should Buy Which Bench Mounted Bullet Pullers?
Choose a collet-based puller if you want cleaner bullet recovery and already know the calibers you load most often. Choose an inertia or impact puller if you want the most flexibility across different cartridges and a simple tool that works with less setup.
If you correct loads frequently, process larger quantities, or want a more controlled bench workflow, a mounted or press-compatible model is usually the better long-term buy. If you only pull bullets occasionally, a simpler universal option may be all you need.