A dependable high-lift jack mount keeps bulky recovery gear secure while leaving valuable cargo space available for the trail. The right design also reduces rattling, protects the jack, and matches your SUV’s mounting points.
We compared universal tube mounts, roof-rack brackets, vehicle-specific systems, and complete hardware kits to help you choose a practical setup for your vehicle and off-road routine.
Best 10 High Lift Jack Mounts for SUVs Picks for 2026
Wheel-Lift Accessory
- Lifts directly from a wheel
- 5,000-pound lift capacity
- Rubber-coated hooks and protective pad
Best For: Wheel-based vehicle lifting and off-road recovery setups
Adjustable Tube Mount
KAVIUS Red High Lift Jack Mount
- Fits 1-to-2.5-inch round or square tubes
- Mounts to bumpers, cages, and roof racks
- Pair includes three hardware sizes
Best For: SUVs with compatible tubular mounting points
Black 2-Pack Mounts
KAVIUS High Lift Jack Tube Mount
- Fits 1-to-2.5-inch tubing
- Includes a pair and three hardware sizes
- Listed 2.5-ton load capacity
Best For: SUVs and trucks with compatible tubular off-road equipment
Silver Universal Mount
KAVIUS Adjustable High Lift Jack Bracket
- Fits 1-to-2.5-inch round or square tubes
- Includes pair and three hardware sizes
- Listed capacity of about 4,660 pounds
Best For: SUVs and trucks with compatible tubular racks or bumpers
JK Tailgate Hinge Mount
Rear Jack Brackets for Jeep Wrangler JK
- Exterior mount preserves interior cargo space
- Fits 2007–2017 Jeep Wrangler JK
- Two-point support; minor drilling required
Best For: Wrangler JK owners needing a vehicle-specific rear jack mount
Universal Tube Clamp Mount
Adjustable Jack Mount for Round or Square Tubing
- Fits 1–2.5-inch round or square tubing
- Supports bumpers, cages, bars, and roof racks
- No-drill design with multiple U-bolt sizes
Best For: Off-road vehicles with compatible tubular mounting points
Tacoma Bed Rail Mount
Horizontal Jack Brackets for Toyota Tacoma
- Fits Toyota Tacoma models from 2005 onward
- Uses the truck bed deck rail system
- No-drill aluminum mounting design
Best For: Tacoma owners with a compatible bed rail system
Best Roof Rack Pick
- Fits M6/M8 rack slots and many standard farm jacks
- Bolt-on installation requires no drilling
- Corrosion-resistant, low-profile design with twist handles
Best For: SUVs with compatible roof racks and crossbars
Best Complete Kit
- Includes brackets, covers, strap, and screw accessories
- Slotted 1/8-inch steel brackets support adjustment
- Through-holes permit adding your own padlock
Best For: Off-road vehicles needing an adjustable universal mounting kit
Wheel-Lift Accessory – Hi-Lift Jack Lift-Mate LM-100
The Hi-Lift LM-100 Lift-Mate is a practical alternative to conventional high lift jack mounts for SUVs when you need to lift a vehicle directly from a wheel. Its rubber-coated hooks, tire-protecting pad, and 5,000-pound capacity make it suited to controlled off-road recovery setups.
Best For: SUV and vehicle owners who need a wheel-lifting accessory rather than a fixed jack storage mount.
Pros:
- Allows a Hi-Lift jack to lift directly from a wheel.
- 5,000-pound lift capacity.
- Rubber-coated hooks and pad help protect the wheel and tire.
- Designed to reduce the jack-bar travel needed to reach a safe lifting height.
Cons:
- It is a lifting adapter, not a permanent vehicle-mounted jack holder.
- Vehicle-specific fit is listed, so confirm compatibility before buying.
- Requires suitable wheel access and careful positioning during use.
The LM-100 is best viewed as a wheel-lift solution for recovery gear, especially when lifting at the bumper or frame is inconvenient. Its included nose adapter and nylon straps add useful setup flexibility.
Adjustable Tube Mount – KAVIUS Red High Lift Jack Mount
This KAVIUS red tube mount is one of the more adaptable high lift jack mounts for SUVs with compatible tubular equipment. It fits round or square tubing from 1 to 2.5 inches and is intended for bumpers, crash bars, roll cages, and roof racks.
Best For: SUV, truck, ATV, and UTV owners mounting a high-lift jack to compatible 1-to-2.5-inch tubing.
Pros:
- Fits round or square tubing measuring 1 to 2.5 inches.
- Works with tubular bumpers, crash bars, roll cages, and roof racks.
- Includes a pair of mounts with three hardware sizes.
- Uses aluminum, high-strength metal, and stainless-steel hardware.
Cons:
- Not compatible with tubing outside the specified 1-to-2.5-inch range.
- Requires a safe, firm tubular mounting location.
- Some product details list differing warranty durations, so verify coverage with the seller.
The adjustable design gives this mount broad off-road versatility, but tube measurement is essential. Check both the tubing diameter and the strength of the chosen mounting point before installation.
Black 2-Pack Mounts – KAVIUS High Lift Jack Tube Mount
The black KAVIUS 2-pack is designed for SUV owners who want to secure a high-lift jack to existing tubular equipment. Its 1-to-2.5-inch round or square tube fit covers common off-road mounting locations, including front bumpers, roll cages, and roof racks.
Best For: Off-road SUVs and trucks with sturdy 1-to-2.5-inch tubing and a preference for a black mount finish.
Pros:
- Fits round or square tubing from 1 to 2.5 inches.
- Designed for bumpers, crash bars, roll cages, and roof racks.
- Includes a pair of mounts and three sizes of hardware.
- Aluminum construction includes stainless-steel hardware.
Cons:
- Tube diameter must remain within the specified 1-to-2.5-inch range.
- Mounting location must be safe and firm.
- The listing identifies a 2.5-ton load capacity, so match it to your jack and setup.
This black version offers the same practical tube-mounting approach in a two-piece configuration. It is a sensible choice when your SUV already has compatible tubular structure, but it is not a universal fit for every roof rack or bumper.
Silver Universal Mount – KAVIUS Adjustable High Lift Jack Bracket
This silver KAVIUS bracket is a flexible option among high lift jack mounts for SUVs, with compatibility for round or square tubing between 1 and 2.5 inches. It is intended for tubular bumpers, crash bars, roll cages, and roof racks on SUVs, trucks, ATVs, and other off-road vehicles.
Best For: SUV and truck owners seeking a silver adjustable mount for a compatible tubular rack, bumper, or cage.
Pros:
- Fits 1-to-2.5-inch round or square tubing.
- Suitable for several mounting locations, including roof racks and bumpers.
- Includes a pair of mounts with three sizes of hardware.
- Listed load capacity is approximately 4,660 pounds.
Cons:
- Only fits tubing within the stated diameter range.
- Requires a structurally sound and secure mounting point.
- Warranty information lists one year, so confirm current coverage before purchase.
The silver finish and broad vehicle compatibility make this a versatile storage-mount candidate for off-road builds. Measure the tube carefully and verify the rack or bumper can safely support the mounted jack.
JK Tailgate Hinge Mount – Rear Jack Brackets for Jeep Wrangler JK
For Jeep owners comparing high lift jack mounts for SUVs, this rear bracket system carries an off-road jack outside the vehicle to preserve cargo space. It fits 2007–2017 Jeep Wrangler JK models, attaches to the tailgate hinges, and works with the factory bumper and most aftermarket bumpers without tire carriers. Minor drilling is required.
Best For: Jeep Wrangler JK owners who want an exterior, tailgate-hinge-mounted jack solution.
Pros:
- Mounts the jack outside the vehicle to save interior cargo room.
- Compatible with 2007–2017 Jeep Wrangler JK models.
- Uses two mounting points to help secure the jack and reduce vibration noise.
- Includes the bracket, installation manual, and required hardware.
Cons:
- Requires minor drilling during installation.
- Hi-Lift jack is not included.
- Vehicle-specific fit limits use to compatible Wrangler JK setups.
This is a practical choice when cargo space is a priority and your Wrangler has a suitable bumper configuration. Confirm your model year, bumper style, and tire-carrier setup before ordering.
Universal Tube Clamp Mount – Adjustable Jack Mount for Round or Square Tubing
This adjustable tube mount is a versatile option among high lift jack mounts for SUVs, fitting round or square tubing from 1 to 2.5 inches. It is designed for tube bumpers, bull bars, roll cages, and roof racks, and installs without drilling when the mounting surface and included hardware are suitable.
Best For: SUV and off-road builds with compatible round or square tube bumpers, bars, cages, or racks.
Pros:
- Fits tubing from 1 to 2.5 inches in diameter or width.
- Works with both round and square tubing.
- Designed for no-drill installation.
- Includes aluminum mounts, three U-bolt size pairs, washers, nuts, and bases.
Cons:
- Requires careful measurement of the vehicle tubing before purchase.
- Compatibility depends on having a suitable tube mounting location.
- Hardware and mount fit may add bulk to the installation area.
Its adjustable design makes this a flexible pick for varied off-road tube layouts. Verify tubing dimensions and available clearance, particularly if mounting on a roof rack or narrow bar.
Tacoma Bed Rail Mount – Horizontal Jack Brackets for Toyota Tacoma
High Lift Jack Mount Brackets fit for Toyota Tacoma 2005 Up | For Truck Bed Deck Rail System 2PCS
Check Price On AmazonDesigned for Toyota Tacoma owners shopping for high lift jack mounts for SUVs and trucks, these aluminum brackets mount the jack horizontally in the truck bed. They use the Tacoma deck rail system and install without drilling, providing a dedicated bed-mounted storage position.
Best For: Toyota Tacoma owners with a truck bed deck rail system who want a horizontal jack mount.
Pros:
- Compatible with Toyota Tacoma models from 2005 onward.
- Uses the existing truck bed deck rail system.
- Installs without drilling.
- Made from aluminum alloy.
Cons:
- A compatible truck bed deck rail system is required.
- Fit is limited to the specified Tacoma application.
- Mounting hardware may leave the jack exposed in the truck bed.
This mount suits Tacoma owners who prefer keeping the jack in the bed rather than inside the cab. Confirm that your truck has the required deck rail system before purchasing.
Best Roof Rack Pick – BUNKER INDUST Farm Jack Mount
For SUV owners comparing high lift jack mounts for SUVs, the BUNKER INDUST Farm Jack Mount is a practical roof-rack option. Its two-piece design fits M6/M8 slots and crossbars on platforms from brands such as Rhino-Rack, Thule, and Front Runner, while also accommodating most standard farm jacks.
Best For: Off-roaders who want a low-profile, bolt-on roof-rack mount with quick jack access.
Pros:
- Works with M6/M8 single- or dual-slot platforms and many standard farm jacks.
- Installs without drilling or vehicle modifications.
- Stainless steel construction with E-coating and powder coating helps resist rust and corrosion.
- Twist handles provide quick jack release, while the low-profile design helps reduce vibration and snag risks.
Cons:
- Requires a compatible roof rack or crossbar system.
- Roof-mounted storage may add exposure to weather and vehicle height.
This is a versatile choice when accessible exterior storage matters. Confirm your rack slot dimensions and available clearance before ordering.
Best Jeep Interior Mount – Roll Cage High Lift Jack Brackets
These roll cage brackets are a vehicle-specific option among high lift jack mounts for SUVs. They are designed for 2007–2017 Jeep Wrangler JK and JKU models, or other vehicles with a suitably sized roll cage, and hold the jack horizontally inside the vehicle.
Best For: Jeep Wrangler JK/JKU owners seeking protected interior jack storage without drilling.
Pros:
- Designed for 2007–2017 Jeep Wrangler JK and JKU models.
- Can fit other suitable roll cages, with two ring lengths included for adjustment.
- Aluminum alloy brackets and stainless steel rings provide a solid, rust-resistant construction.
- Installs without drilling and stores the jack horizontally inside the vehicle.
Cons:
- Fit depends on the roll-cage dimensions and is less universal than roof-rack mounts.
- Interior mounting uses cabin space and may not suit vehicles without a compatible roll cage.
For the specified Wrangler years, this design offers a straightforward way to keep a farm jack inside the cabin. Measure the roll cage and select the appropriate ring length before purchase.
Best Complete Kit – High Lift Jack Mount System
The High Lift Jack Mount System is a universal-fit kit for off-road vehicles that bundles the main mounting hardware with covers, a retaining strap, and screws. For shoppers seeking high lift jack mounts for SUVs, its slotted steel brackets offer adjustable positioning and a straightforward storage solution.
Best For: Off-road users who want an all-in-one mounting kit with strap retention and padlock compatibility.
Pros:
- Includes two brackets, two bracket covers, a hook-and-loop strap, and screw accessories.
- Heavy-duty 1/8-inch alloy steel brackets use slots for easier adjustment.
- The strap helps keep the jack handle fixed during transport.
- Carriage-bolt through-holes allow use of a separately supplied padlock.
Cons:
- The notes do not identify a specific vehicle or mounting location, so fitment must be verified.
- A padlock is not included.
- Installation hardware and mounting position may require vehicle-specific planning.
This kit is appealing for buyers who value included accessories and adjustable brackets. Check the intended mounting surface and hardware compatibility for your SUV before installation.
How We Picked the Best High Lift Jack Mounts for SUVs
We focused on mounting versatility, fit range, construction details, included hardware, and installation practicality. The selection covers common mounting locations—including tube bumpers, bull bars, roll cages, roof racks, rear doors, and model-specific brackets—so you can compare solutions for different SUV platforms.
We also looked for useful adjustment ranges, protective caps or straps, compatibility with round and square tubing, and clear vehicle or rack fit information. Before buying, confirm the jack’s dimensions, the mount’s stated tube or slot size, and whether your vehicle has enough structural support for the intended location.
Quick Comparison
| Mount type | Best suited to | Main advantage | Check before ordering |
|---|---|---|---|
| Universal tube mount | Custom bumpers, bars, cages, and racks | Broad fit range and flexible placement | Tube shape, diameter, and clearance |
| Roof-rack bracket | SUVs with compatible rack slots | Convenient exterior storage | Rack slot hardware, load rating, and jack length |
| Vehicle-specific bracket | Jeep Wrangler JK or Toyota Tacoma applications | More tailored fit | Exact model year, trim, and mounting location |
| Complete mounting kit | Buyers needing most installation hardware | Fewer parts to source separately | Fastener size and supplied securing method |
Key Buying Factors for High Lift Jack Mounts for SUVs
Fit and Mounting Surface
Universal mounts are useful when your SUV has round or square tubing, but a stated 1- to 2.5-inch range does not guarantee compatibility with every bumper or rack. Measure the actual tube or slot, inspect access for tightening hardware, and verify that the jack will not obstruct lights, doors, windows, or roof accessories.
Security and Vibration Control
A mount should hold the jack firmly against movement from rough roads. Caps, straps, locking hardware, and correctly tightened fasteners can help prevent rattling and loss. If theft is a concern, choose a location and design that can accept an additional lock or security device.
Load, Clearance, and Weather Exposure
Consider the jack’s weight, the bracket’s construction, and the strength of the rack or bumper—not just the bracket itself. Roof-mounted equipment adds height and may affect garage clearance, fuel economy, and wind noise. Exterior mounts should also be inspected periodically for corrosion and loose hardware.
Installation Requirements
Some kits are close to bolt-on solutions, while others may require drilling, spacers, or custom fabrication. Check whether bolts, caps, straps, and washers are included, and follow the manufacturer’s torque and inspection guidance.
Who Should Buy Which High Lift Jack Mounts for SUVs?
- Choose a universal tube mount if you use a custom bumper, bull bar, roll cage, or tubular rack and want adjustable placement.
- Choose a roof-rack mount if your SUV already has compatible M6 or M8 slots and you prefer to keep the jack outside the cabin.
- Choose a vehicle-specific bracket if you drive a compatible Jeep Wrangler JK or Toyota Tacoma and want a more tailored installation.
- Choose a two-bracket or complete kit if you are building a new setup and want the alignment hardware and retention pieces in one package.
- Choose a compact lift attachment instead of a permanent mount if you need lifting capability but rarely carry the jack and do not have a suitable structural mounting point.
For most buyers, the best High Lift Jack Mounts for SUVs are the ones that match the vehicle’s structure first and the preferred storage location second. Recheck fasteners after the first few trips and before every demanding recovery operation.