A dependable high-lift jack mount keeps bulky recovery equipment secure, accessible, and protected from unnecessary movement on the trail. The right design also helps prevent rattling, awkward loading, and compatibility problems.
This roundup compares 10 high-lift jack mounts for trucks across roof racks, truck beds, tube bumpers, roll cages, and vehicle-specific applications. Use the guide below to narrow your choice by fit, mounting location, construction, and installation needs.
Best 10 High Lift Jack Mounts for Trucks Picks for 2026
Adjustable Tube-Mount Versatility
- Fits 1- to 2.5-inch round or square tubing
- Works on bumpers, cages, racks, and crash bars
- Includes multiple hardware sizes
Best For: Off-road vehicles with compatible tubular mounting points
Lockable Truck-Bed Security
- Mounts inside a pickup bed
- Installs horizontally or vertically
- Includes a keyed lock and hardware
Best For: Pickup owners prioritizing secure in-bed jack storage
Tacoma Rail-System Fit
Tacoma High Lift Jack Brackets
- Fits Toyota Tacoma 2005 and newer
- Requires a bed deck rail system
- No-drill horizontal bed installation
Best For: Tacoma owners with compatible bed rails
Heavy-Duty Multi-Size Clamps
- Fits 1- to 2.5-inch round or square tubes
- Includes three U-bolt size pairs
- No-drill mounting for bars, cages, and racks
Best For: Off-road trucks with compatible exterior tubing
Truck Bed Trail Mount
Adjustable Tacoma Jack Bracket
- Fits specified Tacoma and Tundra models
- Bolt-on factory-track installation
- Two-point, weather-resistant jack support
Best For: Toyota truck owners needing an adjustable bed-rail mount
Jeep JK Rear Hinge Mount
- Fits 2007–2017 Jeep Wrangler JK
- Saves cargo space with exterior mounting
- Includes hardware and installation manual
Best For: JK owners with bumpers without tire carriers
Roof Rack Farm Jack Holder
- Fits compatible M6/M8 roof-rack slots
- Stainless steel, coated construction
- Quick-release, low-profile design
Best For: Overland vehicles with compatible slotted roof racks
Best Universal Tube Mount
Adjustable High Lift Jack Mount
- Fits 1- to 2.5-inch round or square tubing
- Includes paired mounts and multiple hardware sizes
- Designed for trucks, SUVs, bumpers, cages, and racks
Best For: Vehicles with compatible tubular mounting points
Best Roof Rack Brackets
Hooke Road High Lift Jack Mounts
- Designed for compatible Hooke Road aluminum bar racks
- Quick-release twist handles improve access
- Powder-coated 11-gauge steel construction
Best For: Truck and Jeep owners with compatible Hooke Road roof racks
Best Complete Mounting Kit
- Includes brackets, covers, strap, and screws
- Slotted 1/8-inch steel brackets allow adjustment
- Lock-compatible carriage-bolt through-holes
Best For: Off-road users wanting a bundled, adjustable storage solution
Adjustable Tube-Mount Versatility – KAVIUS High Lift Jack Mount
For shoppers comparing high lift jack mounts for trucks and off-road vehicles, this KAVIUS model is a flexible option for secure mounting on round or square tubing. It fits tubing from 1 to 2.5 inches and is intended for bumpers, crash bars, roll cages, and roof racks, so measuring your mounting tube is essential before purchase.
Best For: Truck, SUV, ATV, and UTV owners who need an adjustable mount for compatible tubular mounting points.
Pros:
- Fits 1- to 2.5-inch round or square tubing.
- Works with bumpers, crash bars, roll cages, and roof racks.
- Includes multiple hardware sizes and stainless steel hardware.
- Aluminum construction with an anti-theft design.
Cons:
- Not suitable for tubing outside the 1- to 2.5-inch range.
- Requires a safe, firm tubular mounting location.
This is a practical choice when your truck or off-road vehicle already has compatible tubing. Confirm the diameter and mounting stability first to avoid a poor fit.
Lockable Truck-Bed Security – Hi-Lift Loc-Rac LR-200
The Hi-Lift Loc-Rac LR-200 is designed for buyers seeking high lift jack mounts for trucks that keep the jack inside a pickup bed. Its steel brackets can be installed horizontally or vertically, and the included padlock adds a layer of security for stored equipment.
Best For: Pickup owners who want a lockable, inside-the-bed mounting system with flexible orientation.
Pros:
- Mounts a Hi-Lift jack inside a pickup bed.
- Supports horizontal or vertical installation.
- Uses heavy-duty steel construction.
- Includes two brackets, installation hardware, and a keyed lock.
Cons:
- Designed for pickup-bed installation rather than tubular exterior mounting.
- May require selecting the orientation that best suits the available bed space.
Choose this system if protected, organized truck-bed storage matters more than mounting the jack on an exterior bar or rack. Its included lock and two-position installation make it especially practical for utility-focused setups.
Tacoma Rail-System Fit – Tacoma High Lift Jack Brackets
High Lift Jack Mount Brackets fit for Toyota Tacoma 2005 Up | For Truck Bed Deck Rail System 2PCS
Check Price On AmazonThese brackets are a focused option among high lift jack mounts for trucks, fitting Toyota Tacoma models from 2005 onward when the truck has a bed deck rail system. The aluminum rail-mounted design installs without drilling and positions the jack horizontally in the truck bed.
Best For: Toyota Tacoma owners with a compatible bed deck rail system who want a no-drill in-bed mount.
Pros:
- Designed for Toyota Tacoma models from 2005 onward.
- Uses the truck-bed deck rail system for mounting.
- Installs without drilling.
- Made from aluminum alloy and supports horizontal jack placement.
Cons:
- Requires a truck-bed deck rail system.
- Fitment is targeted to Toyota Tacoma models from 2005 onward.
- Does not provide the broader universal fit of tube mounts.
This is a sensible choice for Tacoma owners who already have the required rail system and prefer a clean, no-drill installation. Verify both model year and rail availability before ordering.
Heavy-Duty Multi-Size Clamps – Black Adjustable Tube Mount
This black tube mount suits buyers comparing high lift jack mounts for trucks with tubular bumpers, bull bars, roll cages, or roof racks. It accommodates 1- to 2.5-inch round or square tubing and includes three U-bolt sizes, allowing more flexibility when matching the hardware to the mounting tube.
Best For: Truck and off-road owners who need a no-drill mount for compatible round or square tubing.
Pros:
- Fits tubing from 1 to 2.5 inches in diameter.
- Compatible with both round and square tubing.
- Includes three pairs of U-bolts and related washers and nuts.
- Uses 6061-T6 aluminum mounts with stainless steel hardware.
Cons:
- Only fits tubing within the specified 1- to 2.5-inch range.
- Requires checking tube dimensions before purchase.
- Intended for suitable tubular mounting locations rather than a standard truck bed.
The multiple U-bolt sizes make this a versatile choice for compatible exterior tube locations. Measure the tube carefully and confirm it is strong and secure enough for the intended installation.
Truck Bed Trail Mount – Adjustable Tacoma Jack Bracket
For shoppers comparing high lift jack mounts for trucks, the ZORASEN bracket is a practical truck-bed option for select Toyota models. It uses the factory track system, installs without drilling, and lets you position the jack toward the front or rear of the bed.
Best For: 2016–2023 Toyota Tacoma owners and 2023 Toyota Tundra owners who want an adjustable, space-saving bed-rail mount.
Pros:
- Fits specified Tacoma and Tundra truck-bed applications.
- Installs with a simple bolt-on process using a 9/16-inch wrench or socket.
- Secures the jack at two points to help reduce vibration noise.
- Powder-coated carbon steel construction is designed for weather resistance.
Cons:
- Vehicle compatibility is limited to the listed Toyota models and factory track setup.
- The jack itself is not included.
- Warranty coverage is listed as three months.
This mount is a strong fit when straightforward installation and flexible bed positioning matter. Confirm your truck model and rail configuration before ordering.
Jeep JK Rear Hinge Mount – Off-Road Jack Brackets
Among high lift jack mounts for trucks and off-road vehicles, this rear mounting bracket is designed specifically for 2007–2017 Jeep Wrangler JK models. It moves the jack outside the vehicle to preserve cargo space and attaches at the tailgate hinges, though minor drilling is required.
Best For: Jeep Wrangler JK owners with a factory or compatible aftermarket rear bumper without a tire carrier.
Pros:
- Designed for 2007–2017 Jeep Wrangler JK models.
- Mounts the jack externally to save interior cargo space.
- Secures the jack in two locations to help limit operating vibration noise.
- Includes the bracket, installation manual, and required hardware.
Cons:
- Minor drilling is required for installation.
- Not intended for bumpers with tire carriers.
- The hi-lift jack is not included.
This is a vehicle-specific choice for JK owners who prioritize exterior storage and compatibility with several bumper configurations. Check your bumper style and be prepared for the stated drilling requirement.
Roof Rack Farm Jack Holder – Quick-Release M6/M8 Mount
This roof-rack holder offers a low-profile way to carry a farm jack when comparing high lift jack mounts for trucks, SUVs, and 4x4s. It is designed for compatible M6/M8 single- or dual-slot platforms and uses bolt-on installation without drilling or vehicle modification.
Best For: Overland, camping, and off-road vehicle owners with a compatible slotted roof-rack platform or crossbar.
Pros:
- Compatible with M6/M8 single-slot and dual-slot roof-rack systems.
- Stainless steel construction with a coated surface finish.
- Quick-release knob provides convenient jack access and removal.
- Low-profile design helps conserve roof-rack space.
Cons:
- Requires a compatible roof-rack slot or crossbar system.
- Fit for a specific jack and rack combination should be confirmed before purchase.
- Roof mounting adds equipment to the vehicle’s exterior.
This mount suits buyers who already use a slotted roof rack and want compact, removable jack storage. Verify the rack’s M6/M8 compatibility and available mounting space first.
Best Universal Tube Mount – Adjustable High Lift Jack Mount
For shoppers comparing high lift jack mounts for trucks and other off-road vehicles, this adjustable tube mount is designed for secure installation on compatible round or square tubing. It fits tubing from 1 to 2.5 inches in diameter, so measuring your intended mounting bar before purchase is essential.
Best For: Trucks, SUVs, ATVs, roll cages, tubular bumpers, crash bars, and roof racks with firm 1- to 2.5-inch tubing.
Pros:
- Fits round or square tubing from 1 to 2.5 inches.
- Includes a pair of mounts with three sizes of hardware.
- Uses aluminum, high-strength metal, and stainless-steel hardware.
- Triangular grooves help improve grip, while the design adds theft resistance.
Cons:
- Only compatible with tubing within the specified 1- to 2.5-inch range.
- Requires a safe, firm mounting tube on the vehicle.
This KAVIUS mount is a versatile choice when your truck or off-road vehicle has suitable tubing. Its broad fit range and included hardware make it practical, but compatibility measurements should come first.
Best Roof Rack Brackets – Hooke Road High Lift Jack Mounts
These Hooke Road brackets are a focused option for mounting a farm jack on an aluminum bar roof rack. Among high lift jack mounts for trucks, they stand out for their quick-release handles and no-drill installation on compatible Hooke Road racks.
Best For: Jeep TJ, JK, JL, Gladiator, Tacoma, and truck owners using compatible Hooke Road aluminum bar roof racks.
Pros:
- Uses M8 T-nuts and clamping lever handles for installation.
- Quick-release twist handles provide easier jack access.
- 11-gauge steel construction has a textured black powder-coat finish.
- Requires no cutting, drilling, or vehicle modifications on compatible racks.
Cons:
- The supplied notes specifically emphasize compatibility with Hooke Road aluminum bar roof racks.
- Roof-mounted storage may be less convenient than an interior location for some users.
This two-piece set makes good use of roof rack space and helps keep the jack outside the cargo area. Confirm that your rack accepts the included M8 T-nuts before ordering.
Best Complete Mounting Kit – Secure Farm Jack Mount System
This all-in-one system is a practical pick for shoppers seeking high lift jack mounts for trucks and off-road vehicles. It combines two adjustable steel brackets with covers, a securing strap, and mounting screws for a more complete storage setup.
Best For: Off-road enthusiasts who want adjustable brackets, a handle-securing strap, and compatibility with a personal padlock.
Pros:
- Includes two brackets, two covers, a hook-and-loop strap, and screws.
- Heavy-duty 1/8-inch alloy-steel brackets are slotted for adjustment.
- Strap helps keep the jack handle fixed during transport.
- Carriage-bolt through-holes allow use of an owner-supplied padlock.
Cons:
- The supplied notes do not identify a specific truck or rack mounting pattern.
- Installation may require selecting and configuring the slotted bracket positions.
With its included accessories and lock-compatible design, this kit suits off-roaders prioritizing accessible, secured jack storage. Verify the mounting surface and available hardware for your specific vehicle before installation.
How We Picked the Best High Lift Jack Mounts for Trucks
We focused on mounts that address the main requirements of truck and off-road owners: dependable retention, useful access, broad or clearly defined compatibility, and practical installation. The selection includes universal tube mounts, roof-rack brackets, truck-bed hardware, and model-specific systems for platforms such as the Toyota Tacoma and Jeep Wrangler.
We also considered whether each design appears suited to a particular mounting surface, what hardware or accessories are included, and how easily the jack can be secured against vibration. Always verify the manufacturer’s dimensions and load guidance before installation.
Quick Comparison
| Mount type | Best for | Main advantage |
|---|---|---|
| Tube mount | Tube bumpers, bull bars, cages, and racks | Flexible placement on compatible round or square tubing |
| Roof-rack mount | Overland trucks and SUVs | Keeps the jack outside the cabin and bed |
| Truck-bed mount | Pickup owners | Convenient access with a lower center of mass |
| Vehicle-specific bracket | Matching Tacoma or Jeep applications | More predictable fit than a universal mount |
| Complete mounting kit | Owners starting from scratch | May include brackets, caps, straps, and fasteners |
Key Buying Factors for High-Lift Jack Mounts for Trucks
Fit and Mounting Surface
Check the jack’s dimensions, the mount’s supported tube diameter, and whether the bracket fits round, square, or slotted hardware. Vehicle-specific mounts can simplify alignment, while universal brackets require more careful measurement.
Security and Vibration Control
Look for locking hardware, threaded fasteners, retaining caps, straps, or other features that keep the jack from shifting. A mount should hold the jack tightly without relying on a loose or improvised tie-down.
Location and Accessibility
Roof storage preserves bed space but adds lifting effort and may affect vehicle height. Bed and rear mounts are generally easier to reach, while bumper or tube mounting can work well for purpose-built off-road rigs.
Materials and Weather Exposure
Because exterior mounts face mud, water, dust, and trail impacts, consider corrosion-resistant finishes and robust hardware. Inspect mounting points periodically, especially after rough driving or frequent jack use.
Who Should Buy Which High Lift Jack Mounts for Trucks?
Choose a tube mount if your truck has compatible tubing, a bull bar, roll cage, or tubular bumper. A roof-rack system suits overland builds that need to preserve cargo space. Pick a truck-bed bracket when easy access and a lower mounting position matter most.
Owners of a compatible Tacoma or Jeep Wrangler should consider a vehicle-specific bracket for a cleaner, more predictable installation. If you need a straightforward starting point, a complete kit with caps, straps, and fasteners can reduce the need to source separate parts.